zivan56 DD-WRT Novice
Joined: 05 Apr 2011 Posts: 33
|
Posted: Sun Oct 30, 2011 19:28 Post subject: |
|
sheky wrote: | DD-WRT is very stable... I am using ip-tv from my internet provider through the router, but picture is freezing on 10s for half a second. Do you maybe know why? |
Not really. I would guess it has more to do with how the Linux network stack works than the actual hardware. Maybe ask other people that use DD-WRT if they have the same issue on other routers first?
Sash wrote: | guy's BS likes to have an
out of running ddwrt |
Code: |
<4>[ 0.000000] Normal 0x00000000 -> 0x00004000
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[1] active PFN ranges
<4>[ 0.000000] 0: 0x00000000 -> 0x00004000
<7>[ 0.000000] On node 0 totalpages: 16384
<7>[ 0.000000] free_area_init_node: node 0, pgdat 8028f230, node_mem_map 81000000
<7>[ 0.000000] Normal zone: 128 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 16256 pages, LIFO batch:3
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
<4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<6>[ 0.000000] Writing ErrCtl register=00000000
<6>[ 0.000000] Readback ErrCtl register=00000000
<6>[ 0.000000] Memory: 61884k/65536k available (2216k kernel code, 3652k reserved, 397k data, 144k init, 0k highmem)
<6>[ 0.000000] NR_IRQS:128
<0>[ 0.000000] irq init done
<4>[ 0.000000] plat_time_init: plat time init done
<6>[ 0.000000] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
<4>[ 0.250000] Mount-cache hash table entries: 512
<6>[ 0.250000] NET: Registered protocol family 16
<4>[ 3.250000] registering PCI controller with io_map_base unset
<4>[ 3.260000] bio: create slab <bio-0> at 0
<6>[ 3.270000] usbcore: registered new interface driver usbfs
<6>[ 3.270000] usbcore: registered new interface driver hub
<6>[ 3.280000] usbcore: registered new device driver usb
<6>[ 3.300000] found calibration data for slot 0 on 0xBF661000
<6>[ 3.310000] PCI: fixup device 0000:00:00.0
<7>[ 3.320000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0000ffff]
<7>[ 3.320000] pci 0000:00:00.0: PME# supported from D0 D3hot
<7>[ 3.320000] pci 0000:00:00.0: PME# disabled
<6>[ 3.340000] found calibration data for slot 1 on 0xBF665000
<6>[ 3.350000] PCI: fixup device 0000:00:01.0
<7>[ 3.360000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x0000ffff]
<7>[ 3.360000] pci 0000:00:01.0: PME# supported from D0 D3hot
<7>[ 3.360000] pci 0000:00:01.0: PME# disabled
<6>[ 3.360000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
<6>[ 3.360000] pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff] (PCI address [0x10000000-0x1000ffff]
<6>[ 3.370000] pci 0000:00:01.0: BAR 0: assigned [mem 0x10010000-0x1001ffff]
<6>[ 3.370000] pci 0000:00:01.0: BAR 0: set to [mem 0x10010000-0x1001ffff] (PCI address [0x10010000-0x1001ffff]
<0>[ 3.380000] fixup irq: got 48
<0>[ 3.380000] fixup irq: got 49
<6>[ 3.380000] Switching to clocksource MIPS
<6>[ 3.390000] NET: Registered protocol family 2
<6>[ 3.390000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 3.400000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
<6>[ 3.410000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 3.410000] TCP: Hash tables configured (established 2048 bind 2048)
<6>[ 3.420000] TCP reno registered
<6>[ 3.420000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 3.430000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 3.430000] NET: Registered protocol family 1
<7>[ 3.440000] PCI: CLS 0 bytes, default 32
<5>[ 3.440000] gpio_proc: module loaded and /proc/gpio/ created
<5>[ 3.440000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<4>[ 3.450000] AR7100 GPIOC major 0
<5>[ 3.450000] init_vdso successfull
<6>[ 3.460000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>[ 3.460000] msgmni has been set to 120
<6>[ 3.470000] io scheduler noop registered
<6>[ 3.470000] io scheduler deadline registered (default)
<6>[ 3.480000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[ 3.480000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A
<6>[ 3.490000] console [ttyS0] enabled, bootconsole disabled
<0>[ 3.500000] guessed flashsize = 8M
<0>[ 3.510000] scanning for root partition
<0>[ 3.510000] uboot detected
<0>[ 3.510000] bootloader size = 50000
<0>[ 3.520000]
<0>[ 3.520000] found squashfs at 13D000
<5>[ 3.530000] Creating 8 MTD partitions on "ar7100-nor0":
<5>[ 3.530000] 0x000000000000-0x000000050000 : "RedBoot"
<5>[ 3.540000] 0x000000050000-0x000000800000 : "linux"
<5>[ 3.540000] 0x00000013d000-0x000000650000 : "rootfs"
<4>[ 3.550000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
<5>[ 3.560000] mtd: partition "rootfs" set to be root filesystem
<5>[ 3.570000] 0x000000670000-0x0000007e0000 : "ddwrt"
<5>[ 3.570000] 0x0000007e0000-0x0000007f0000 : "nvram"
<5>[ 3.580000] 0x0000007f0000-0x000000800000 : "FIS directory"
<5>[ 3.580000] 0x0000007f0000-0x000000800000 : "board_config"
<5>[ 3.590000] 0x000000000000-0x000000800000 : "fullflash"
<6>[ 3.600000] PPP generic driver version 2.4.2
<6>[ 3.600000] PPP Deflate Compression module registered
<6>[ 3.610000] PPP BSD Compression module registered
<6>[ 3.610000] PPP MPPE Compression module registered
<6>[ 3.620000] NET: Registered protocol family 24
<6>[ 3.620000] PPPoL2TP kernel driver, V1.0
<6>[ 3.620000] IMQ driver loaded successfully.
<6>[ 3.630000] Hooking IMQ before NAT on PREROUTING.
<6>[ 3.630000] Hooking IMQ after NAT on POSTROUTING.
<6>[ 3.640000] tun: Universal TUN/TAP device driver, 1.6
<6>[ 3.640000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 3.650000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[ 3.660000] drivers/usb/host/ehci-ar71xx.c: starting AR7100 EHCI USB Controller...done. reset 0x40 usb config 0x30000
<6>[ 5.550000] ar71xx-ehci ar71xx-ehci.0: Atheros AR71xx built-in EHCI controller
<6>[ 5.560000] ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bus number 1
<6>[ 5.600000] ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000
<6>[ 5.620000] ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00
<6>[ 5.620000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 5.630000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 5.640000] usb usb1: Product: Atheros AR71xx built-in EHCI controller
<6>[ 5.640000] usb usb1: Manufacturer: Linux 2.6.34.9-svn16972 ehci_hcd
<6>[ 5.650000] usb usb1: SerialNumber: platform
<6>[ 5.650000] hub 1-0:1.0: USB hub found
<6>[ 5.660000] hub 1-0:1.0: 2 ports detected
<6>[ 5.660000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<7>[ 5.670000] drivers/usb/host/ohci-ar71xx.c: starting AR7100 OHCI USB Controller...
<6>[ 5.670000] ar71xx-ohci ar71xx-ohci.0: Atheros AR71xx built-in OHCI controller
<6>[ 5.680000] ar71xx-ohci ar71xx-ohci.0: new USB bus registered, assigned bus number 2
<6>[ 5.680000] ar71xx-ohci ar71xx-ohci.0: irq 22, io mem 0x1c000000
<6>[ 5.750000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 5.760000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 5.760000] usb usb2: Product: Atheros AR71xx built-in OHCI controller
<6>[ 5.770000] usb usb2: Manufacturer: Linux 2.6.34.9-svn16972 ohci_hcd
<6>[ 5.780000] usb usb2: SerialNumber: platform
<6>[ 5.780000] hub 2-0:1.0: USB hub found
<6>[ 5.780000] hub 2-0:1.0: 2 ports detected
<6>[ 5.790000] usbcore: registered new interface driver usbserial
<6>[ 5.790000] usbcore: registered new interface driver usbserial
<6>[ 5.800000] USB Serial support registered for generic
<6>[ 5.800000] usbcore: registered new interface driver usbserial_generic
<6>[ 5.810000] usbserial: USB Serial Driver core
<6>[ 5.810000] USB Serial support registered for GSM modem (1-port)
<6>[ 5.820000] usbcore: registered new interface driver option
<6>[ 5.820000] option: v0.7.2:USB Driver for GSM modems
<6>[ 5.830000] USB Serial support registered for pl2303
<6>[ 5.830000] usbcore: registered new interface driver pl2303
<6>[ 5.840000] pl2303: Prolific PL2303 USB to serial adaptor driver
<6>[ 5.850000] USB Serial support registered for Sierra USB modem
<6>[ 5.850000] usbcore: registered new interface driver sierra
<6>[ 5.860000] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
<6>[ 5.860000] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
<4>[ 5.870000] u32 classifier
<4>[ 5.880000] input device check on
<4>[ 5.880000] Actions configured
<4>[ 5.880000] Netfilter messages via NETLINK v0.30.
<4>[ 5.890000] nf_conntrack version 0.5.0 (966 buckets, 3864 max)
<4>[ 5.890000] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[ 5.900000] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[ 5.910000] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<4>[ 5.920000] nf_conntrack_rtsp v0.6.21 loading
<4>[ 5.920000] nf_nat_rtsp v0.6.21 loading
<6>[ 5.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 5.930000] IPP2P v0.8.2 loading
<6>[ 5.930000] TCP westwood registered
<6>[ 5.940000] TCP hybla registered
<6>[ 5.940000] TCP vegas registered
<6>[ 5.940000] NET: Registered protocol family 17
<6>[ 5.950000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
<6>[ 5.950000] All bugs added by David S. Miller <davem@redhat.com>
<4>[ 5.990000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[ 6.000000] Freeing unused kernel memory: 144k freed
<4>[ 7.720000] ag7100_mod: module license 'unspecified' taints kernel.
<4>[ 7.720000] Disabling lock debugging due to kernel taint
<0>[ 7.740000] realtek phy id 24615
<0>[ 7.740000] rtl_chip_type_select:RTL8366SR
<0>[ 7.940000] realtek phy id 24615
<0>[ 7.950000] rtl_chip_type_select:RTL8366SR
<4>[ 8.190000] rtl8366sr_phy_setup ethUnit=0
<0>[ 8.190000] rtl8366sr register 0x6 state = 0000018C
<4>[ 8.200000] Realtek 8366SR switch ID 0x8366
<4>[ 12.220000] SP1000
<4>[ 12.220000] phyUnit=0 is link
<4>[ 12.220000] phyUnit=1 is link
<4>[ 12.230000] phyUnit=2 is lostlink
<4>[ 12.230000] phyUnit=3 is link
<4>[ 12.240000] Writing 4
<4>[ 12.240000] rtl8366sr_phy_setup ethUnit=1
<4>[ 12.250000] phyUnit=4 is link
<4>[ 12.250000] Writing 6
<6>[ 12.410000] ath_mimo_hal: 0.9.17.1 (AR5416, REGOPS_FUNC)
<6>[ 12.720000] ath_mimo_pci: 0.9.4.5 (Atheros/multi-bss)
<6>[ 12.730000] ath_mimo_pci: CR-LSDK-1.4.0.152-DDWRT
<6>[ 12.730000] wlan: 0.8.4.2 (Atheros/multi-bss)
<6>[ 12.740000] wlan: mac acl policy registered
<6>[ 12.740000] ath_rate_atheros: Version 2.0.1
<6>[ 12.740000] Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
<4>[ 12.750000] IRQ 48/wifi%d: IRQF_DISABLED is not guaranteed on shared IRQs
<6>[ 12.760000] device id 29
<6>[ 12.770000] ar5416CheckEepromDef: Read Magic = 0xA55A
<6>[ 12.780000] EEPROM being read from flash @0xbf661000
<6>[ 12.780000] need_swap = False.
<4>[ 12.790000] DFS min filter rssiThresh = 18
<4>[ 12.790000] DFS max pulse dur = 131 ticks
<4>[ 12.800000] 1Mbps 2Mbps 5.5Mbps 11Mbps
<4>[ 12.800000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 12.810000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 12.820000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 12.820000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 12.830000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 12.840000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 12.850000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 12.850000] wifi0: mac 128.2 phy 13.0 radio 12.0
<4>[ 12.850000] wifi0: Use hw queue 1 for WME_AC_BE traffic
<4>[ 12.860000] wifi0: Use hw queue 0 for WME_AC_BK traffic
<4>[ 12.870000] wifi0: Use hw queue 2 for WME_AC_VI traffic
<4>[ 12.870000] wifi0: Use hw queue 3 for WME_AC_VO traffic
<4>[ 12.880000] wifi0: Use hw queue 8 for CAB traffic
<4>[ 12.880000] wifi0: Use hw queue 9 for beacons
<4>[ 12.880000] wifi0: Use hw queue 7 for UAPSD
<6>[ 12.890000] wifi0: Atheros 9280: mem=0x10000000, irq=48 hw_base=0xb0000000
<4>[ 12.900000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
<4>[ 12.900000] IRQ 49/wifi%d: IRQF_DISABLED is not guaranteed on shared IRQs
<6>[ 12.910000] device id 29
<6>[ 12.920000] ar5416CheckEepromDef: Read Magic = 0xA55A
<6>[ 12.920000] EEPROM being read from flash @0xbf665000
<6>[ 12.930000] need_swap = False.
<4>[ 12.940000] DFS min filter rssiThresh = 18
<4>[ 12.940000] DFS max pulse dur = 131 ticks
<4>[ 12.940000] 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 12.950000] 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 12.960000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 12.960000] 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 12.970000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 12.970000] 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 12.980000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 12.980000] wifi1: mac 128.2 phy 13.0 radio 12.0
<4>[ 12.990000] wifi1: Use hw queue 1 for WME_AC_BE traffic
<4>[ 12.990000] wifi1: Use hw queue 0 for WME_AC_BK traffic
<4>[ 13.000000] wifi1: Use hw queue 2 for WME_AC_VI traffic
<4>[ 13.000000] wifi1: Use hw queue 3 for WME_AC_VO traffic
<4>[ 13.010000] wifi1: Use hw queue 8 for CAB traffic
<4>[ 13.010000] wifi1: Use hw queue 9 for beacons
<4>[ 13.020000] wifi1: Use hw queue 7 for UAPSD
<6>[ 13.020000] wifi1: Atheros 9280: mem=0x10010000, irq=49 hw_base=0xb0010000
<6>[ 14.630000] device br0 entered promiscuous mode
<4>[ 14.650000] ag7100_ring_free Freeing at 0x83a29000
<4>[ 14.650000] ag7100_ring_free Freeing at 0x83b37000
<4>[ 14.670000] rtl8366sr_phy_setup ethUnit=0
<4>[ 14.670000] phyUnit=0 is link
<4>[ 14.680000] phyUnit=1 is link
<4>[ 14.680000] phyUnit=2 is lostlink
<4>[ 14.680000] phyUnit=3 is link
<4>[ 14.690000] Writing 4
<4>[ 14.700000] ag7100_ring_free Freeing at 0x83b37000
<4>[ 14.700000] ag7100_ring_free Freeing at 0x83a29000
<4>[ 14.710000] rtl8366sr_phy_setup ethUnit=0
<4>[ 14.720000] phyUnit=0 is link
<4>[ 14.720000] phyUnit=1 is link
<4>[ 14.730000] phyUnit=2 is lostlink
<4>[ 14.730000] phyUnit=3 is link
<4>[ 14.740000] Writing 4
<6>[ 14.740000] device eth0 entered promiscuous mode
<6>[ 14.750000] br0: port 1(eth0) entering learning state
<6>[ 14.760000] device br0 left promiscuous mode
<6>[ 14.760000] device br0 entered promiscuous mode
<6>[ 14.770000] device br0 left promiscuous mode
<6>[ 14.780000] device br0 entered promiscuous mode
<4>[ 14.900000]
<4>[ 14.900000] ath_numswbaperbc = 8(1)adj=76800
<6>[ 15.760000] br0: port 1(eth0) entering forwarding state
<6>[ 18.580000] device ath0 entered promiscuous mode
<6>[ 18.590000] br0: port 2(ath0) entering learning state
<4>[ 18.610000]
<4>[ 18.610000] ath_numswbaperbc = 8(1)adj=76800
<4>[ 19.090000] ic->ic_cwm.cw_width :0, ic->ic_cwm.cw_extoffset: 0
<6>[ 19.590000] br0: port 2(ath0) entering forwarding state
<6>[ 22.020000] device ath1 entered promiscuous mode
<6>[ 22.030000] br0: port 3(ath1) entering learning state
<6>[ 22.170000] bonding: Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
<6>[ 22.180000] bonding: MII link monitoring set to 100 ms
<6>[ 22.860000] device eth1 entered promiscuous mode
<6>[ 22.870000] device eth1 left promiscuous mode
<4>[ 22.900000] ic->ic_cwm.cw_width :0, ic->ic_cwm.cw_extoffset: 0
<6>[ 23.030000] br0: port 3(ath1) entering forwarding state
<6>[ 24.850000] etherip: Ethernet over IPv4 tunneling driver
<4>[47847.210000] Resetting; Code: 01
<4>[47849.910000] Resetting; Code: 01
<4>[47853.540000] Resetting; Code: 01
<4>[47856.770000] Resetting; Code: 01
<4>[47861.320000] Resetting; Code: 01
|
Linux version 2.6.34.9-svn16972 (root@dd-wrt) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #5337 Sun May 8 08:35:58 CEST 2011
Firmware: DD-WRT v24-sp2 (05/08/11) std |
|