Router: Netgear WNR2000 v3
Reset: NO
Errors: Update failed.
Status: Can't update this firmware. Seems the size of firmware is too large. The latest updatable firmware is r29837 std (06/06/16).
40k difference in the binaries.
Last edited by jwoods on Fri Jun 24, 2016 20:28; edited 1 time in total
Router: Netgear WNR2000 v3
Reset: NO
Errors: Update failed.
Status: Can't update this firmware. Seems the size of firmware is too large. The latest updatable firmware is r29837 std (06/06/16).
--------------------------
Router: TPLINK ARCHER-C7 v2 Firmware: DD-WRT v3.0-r29974 std (06/20/16)
Kernel: Linux 3.18.35 #13332 Mon Jun 20 03:22:56 CEST 2016 mips
Reset: No
Status: OK
Errors: None yet
--------------------------
Router: TPLINK TL-WDR3600 v1 Firmware: DD-WRT v3.0-r29974 std (06/20/16)
Kernel: Linux 3.10.102 #24501 Mon Jun 20 02:21:35 CEST 2016 mips
Reset: No
Status: OK
Errors: None yet
--------------------------
Router: Dlink DIR859 A3 Firmware: DD-WRT v3.0-r29974 std (06/20/16)
Kernel: Linux 3.18.35 #13336 Mon Jun 20 03:27:10 CEST 2016 mips
Reset: No
Status: OK
Errors: ath0 still has NULL MAC address. 2.4Ghz radio only works enabling MAC clone. WAN/LAN MAC address seems to be random (?). See ticket #5414 for more information and screenshot.
--------------------------
Router: TP-Link TL-WDR4300 v1
Reset: Yes
Status: Working but with connectivity problems
Errors: Wifi is working only on some devices. My PC and nexus 5 (both N 2.4GHz) are working fine, but my HP tablet and xbox one (also both N 2.4GHz) can't find the 2.4GHz signal.
If I revert to build 06/06/16 without any reset it will work fine, but after update to any other newest build (17/06 or 20/06) it get broken again
Router: TP-Link TL-WDR4300 v1
Reset: Yes
Status: Working but with connectivity problems
Errors: Wifi is working only on some devices. My PC and nexus 5 (both N 2.4GHz) are working fine, but my HP tablet and xbox one (also both N 2.4GHz) can't find the 2.4GHz signal.
If I revert to build 06/06/16 without any reset it will work fine, but after update to any other newest build (17/06 or 20/06) it get broken again
Are you using N-Only? Try changing to N/G Mixed. This solved a similar problem I had with Archer C7.
Router: TP-Link TL-WDR4300 v1
Reset: Yes
Status: Working but with connectivity problems
Errors: Wifi is working only on some devices. My PC and nexus 5 (both N 2.4GHz) are working fine, but my HP tablet and xbox one (also both N 2.4GHz) can't find the 2.4GHz signal.
If I revert to build 06/06/16 without any reset it will work fine, but after update to any other newest build (17/06 or 20/06) it get broken again
Are you using N-Only? Try changing to N/G Mixed. This solved a similar problem I had with Archer C7.
Thank you for the reply, I'm using Network Mode = 'Mixed' as I always had used since a long time ago through many dd-wrt builds.
This problem occour only on 16/06 and 20/06 builds, but I updated to latest 24/06 build (without reset and without change any setting) and now it's working fine again
Posted: Tue Jun 28, 2016 13:16 Post subject: TP-Link TL-WR842ND v1
Router: TP-Link TL-WR842ND v1
Tested:
FW: DD-WRT v3.0-r29974 std (06/20/16)
Kernel: Linux 3.10.102 #24561 Mon Jun 20 03:10:41 CEST 2016 mips
Reset: yes
Status: Ok
Samba: Ok
Wifi: Ok
Samba on previose two bilds was not ok. Now it's working prety well.
*****************************
Tested:
Router Model: TP-Link TL-WR842ND v1
Firmware Version: DD-WRT v3.0-r30016 std (06/24/16)
Kernel Version: Linux 3.10.102 #25061 Fri Jun 24 02:41:48 CEST 2016 mips
Reset: yes
Status: Ok
*****************************
Issues common with this 2 builds:
1)This router has 2 buttons:
- WPS/Reset button: not working
- Wifi on/off - not working as in stock, but functioning as a Reset button.
Question: wich one is SES button?
2) Wifi issues on making it operate in 300Mbps rate as in stock. Sometimes I can make it operate 300Mb/s, but just sometimes, nomatter how I try to modify settings ( Network Mode, Channel width)... nothing works. Seem kind of messy to me...
3)USB lights led is off nomatter if I enable USB support. This Works well in stock. Related to next point.
4) Samba issues on the Usb port. Comparinng with stock again where fat32 and ntfs works, but also external HDD with those two windows partition tables, and also with multipartitioned HDDs. I need fat32, ntfs, and ext2,3,4 to work for a multipartitioned HDDs in ddwrt fw.
5)Web Gui problems observed:
- Everytime I flash a dd-wrt beta build web gui cannot be accessed on standart 192.168.1.1 and have to cold restart the router couple of times to get in the GUI (no probs in stock .
- After "Applying Setiings" button push(after modifying some stuff), there comes some unresponsive Gui (html like) and have to cold restart again to work.
- An exemple: of the same behavior is after flashing a ddwrt FW entering Basicsetup>Automatic config.-DHCP>Apply Button provokes the same unresponsive html like webgui page, when have to cold restart again in order to work.
Hope to be of help this testing of mine. I'm newbie and sorry for the english...
Router: DIR-615e3
Firmware: dir615e3-firmware.bin (v3.0-r29974 std)
Kernel: Linux 3.10.102 #24523 Mon Jun 20 02:40:17 CEST 2016 mips
Status: Working
Reset: NONE
Notes on configuration:
DNSMasq
Virtual wireless with bridging
multiple DHCP server
QOS
Errors:
1. When adding a new MAC to filter on save, window goes blank
Otherwise none
Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r29974 std)
Kernel: Linux 3.10.102 #24499 Mon Jun 20 02:13:23 CEST 2016 mips
Status: Working
Reset: NONE
Notes on configuration:
Posted: Sun Jan 22, 2017 11:20 Post subject: status
Router: Netgear WNDR4300 v1
Firmware: DD-WRT v3.0-r29974 std (06/20/16)
Kernel: Linux 3.18.35 #13346
Status: OK
Reset: No
Errors: No
I'm using this version about 1 year, it is good stable version.
Only problem could't configure Bittorrent Transmission to work, DLNA server works fine.
.
