[dbksoftG]

hi all
I need a REDBOOT (wholeflash.bin) for senao ECB-3500 for upload with ejtag
where do i can download it?

it looks like i corrupted the content of the flash when i tryed to flash the firmware with original ECB3500-engenius-1.0.38.img but by using redboot

i talked with the people of engenius and they dont support send the jtag firmware, they also gave me the correct version of which i do had to flash the firmware by using redboot (but now its to late because i cant access the redboot now and only the poser led brings on)

right now i dont have redboot so this is what I need if somebody can please help me and send me the redboot flash and thats all (i think) then with redboot online i can update the rest of the firmware

thanks!!

[Sash]

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=57512

[dbksoftG]

i know Sash, Im charlyG's friend (the one who accidentally destroyed the flash by uploading a wrong file to that senao ECB-3500, by using redboot)

first
i first tryed to install dd-wrt and it looks like i installed ok and i saw the "partitions" ok
but when i was restarting the senao, it never booted to linux (and the script boot was ok) i did the 30-30-30 several times also i try to reset with another way that i saw around..

dd-wrt never brings, only redboot even leaving it alone for a few hours

then
i readed in this web. that one guy could restore the original firmware (that cames with the senao by using redboot) but it was for another model, so i didnt used his firmware. insted i searched without success the .bin file
then.. because in the engenius web there is not a correct .bin file i used the .img that they gives and renamed it to .bin }

---------------
why?
the thing is i had a problem in my first day (about 3 hours from out the box) with this engenius
i started the engenius device
with installed antenas mounted on a tower..
then.. i try set up a bridge, changed password, everything ok.
then i connected with dhcp enabled client, and then for some reason i losted my router (no ping 192.168.1.1 no web gui nothing, also no dhcp server, nothing just completely lost)

1 hour later i decided to took down the router from the tower and reseted with the small button just like it says the manual (5 seconds)
and it got back to 192.168.1.1 BUT neither the default password for admin nor my password worked..

i wait for 2 days to receive an answer from where i bought (that try to reset again, 30-30-30, didnt change anything) and also the told me that device doesnt have warranty so that was very sad.

i try to login from telnet 192.168.1.1 port 23 and it asked me for login: when i typed admin
it sayd "no valid shaddow" or something like that
and when i tryed with my user and password it just sayd no valid password
---------------


i uploaded it with tftp, i then flashed the senao
with catastrophically results.

CharlyG he did the jtag cable and got success, but now what he needs is the wholeflash.bin (at least only with redboot) so then with tftp i will reupload the correct .bin (which the ppl of engenius sended me [late]) by using the same way that dd-wrt installs.. fis init....

[Sash]

redboot never dies so follow the information u where given

[dbksoftG]

im not so sure.. it is not responding anymore maybe its not dead but, its damaged or in another state, but.. is there a place to download a fresh copy of redboot, so charlyG will upload it by using the jtag?

i really appreciate your time!
Thanks you very much!